BY-PASS OIL FILTRATION UNITS

You change your oil, not because you want to, but because you have to. Engines/machines such as lubrication & hydraulic systems operate in a range of different environments, and are subjected to different workloads/temperatures. This is creating equally diverse rate of contamination. Therefore, manufacturer provides recommendation for oil change intervals to reduce the down time of equipment.

With the availability of affordable oil analysis with ISO particle counts, the philosophy of changing the oil in a prescribed ‘recommended’ interval has changed in recent years. Oil sample analysis is playing a large role in ‘preventative maintenance’ programs, allowing you to observe contamination levels, oil condition and wear trends in your equipment’s. These patterns can aid in identifying equipment problems before they get out of hand. More importantly, oil sample analysis enables you to monitor the health of the additive package and contamination levels in the oil. With improved filtration, we are able to safely maximize oil change intervals while achieving reduced components wear, to reduce costs and environmental impact.

Over 80% of equipment’s failures are the result of dirty/contaminated oil. Four major causes of equipment oil deterioration are moisture, particulate matter, acid build-up and oxidation – all commonly found in all equipment’s. By efficiently removing water and ultra-fine wear particles missed by the standard oil filters, contamination levels are dramatically reduced. This immediately lowers the risk of malfunctioning control valves, downtime, and the need to change the oil. The cleaner you can keep oil, the longer you can go between changes. If the concentration of ultra-fine particles and acidity levels in oil remain low, you can prolong the oil and increase productivity, resulting in savings that go directly to the Bottom Line.

Generation 2 Filtration™ (G2F) bypass filtration has the ability to polish small volumes of oil at low flow rates, down to 1 micron, through the precision wound multi-ply ‘axial-flow’ cellulose element, removing the ultra-fine contamination and water normally missed by standard filters with 4 stages of filtration. Generation 2™ elements are designed to meet ‘Servo Control Valve’ requirements associated with high accuracy and stability, precise positioning, fine velocity and acceleration controls, found in lubrication and hydraulic applications. Elements are vacuum sealed and come with a plastic disposal bag ensuring clean and easy element replacement. These “by-pass” micro filter systems can be installed on any oil reservoir without interfering with the operation of the equipment or the existing filter system.

We have two product lines for on-line bypass filtration. Those are “LP series” for low pressure applications and “HP series” for high pressure applications as per specification below –
We went above and beyond to create a fantastic experience. Perfectly crafted to suite your industrial business with almost unlimited options to get almost unlimited options.